RENEGADE DESIGN / FORGED WHEELS
Forged Wheels for Jeep Grand Cherokee SRT & Trackhawk
2 models · 21–24″ · monoblock & multi-piece · TÜV
Custom forged wheels for the Jeep Grand Cherokee SRT WK2 and Trackhawk in 21, 22, 23 and 24 inches. Monoblock and multi-piece designs forged from 6061-T6 aluminium, TÜV-certified and built to the WK2 fitment: 5×127, 71.5 mm bore, clearance for the Brembo six-piston front brakes and a load rating for the 2.4-tonne Trackhawk.
Jeep SRT & Trackhawk models
Sizes and fitment by model
| Model | Sizes | Wheels |
|---|---|---|
| Jeep SRT WK2 | 21″–24″, staggered front/rear on request PCD 5×127; Brembo 6-piston front |
View wheels |
| Jeep Trackhawk | 21″–24″, staggered front/rear on request PCD 5×127; Brembo 6-piston, 400 mm front |
View wheels |
Sizes shown are the catalogue range; the exact set for your car is confirmed at the quote stage.
Do the wheels clear the Trackhawk's Brembo brakes?
Yes. The 400 mm front discs and six-piston calipers are checked on every design; clearance is built into the wheel, no spacers.
Which size is right for the SRT and Trackhawk?
22″ is the most popular and keeps a tyre with enough sidewall for the vehicle weight; 23–24″ are fitted with lower-profile tyres, confirmed with the quote.
Are the wheels rated for the Trackhawk's weight and power?
Yes. Wheels for the WK2 are built with a high load rating and TÜV-certified for the 2.4-tonne Trackhawk.
Do I need hub rings or spacers?
No. Wheels are machined to the 5×127 pattern and 71.5 mm bore with the offset calculated for the WK2, so they mount directly on the hub.
How long does it take and do you ship to the US?
Made to order, usually 4–8 weeks depending on design and finish. Shipping worldwide, including the US, with TÜV documentation.
Get a quote for Forged wheels
Forged wheels for the SRT and Trackhawk
The Grand Cherokee SRT and the 707 hp Trackhawk are heavy, fast SUVs on 20″ factory wheels, so a forged set has to carry the weight, clear the Brembo brakes and still cut unsprung mass. Ours are forged from 6061-T6 billet with a high load rating and machined to a deep concave that suits the wide WK2 body. The CORE and SCULPT collections were designed on the Trackhawk; 22″ is the most popular size, 24″ the largest we fit with a tyre that is still suitable for the vehicle weight.
Fitment notes for the WK2
Bolt pattern 5×127, bore 71.5 mm. The Trackhawk’s 400 mm Brembo front discs and six-piston calipers need more clearance than the SRT’s, so each design is checked on both cars. A square setup is standard; a wider rear wheel is available. Tyre sizes keep the rolling circumference within tolerance so the speedometer, the Selec-Track modes and the launch control read correctly. TPMS sensors are transferred or supplied new.
Finishes
Satin and gloss black, gunmetal, bronze, brushed and polished faces and two-tone versions with a diamond-cut lip. Colour-matching to the body or the Trackhawk’s yellow Brembo calipers is done in-house.
